Tube and electric welding shop #1:

• TASA "20-76" for tailoring of tubes for water and gas supply systems acc. to GOST 3262-75, nominal diameter 20 80, length from 4 to 9 m., used for water-plumbing, gas-mains and heating systems; longitudinal welded steel tubes acc. to GOST 10704-91 / 10705-80 diameter 57.0 108.0 mm., length from 4 to 9m, used for pipe-lines and constructions of different functions;
• TASS "8-15" for tailoring of water and gas supply systems acc. to GOST 3262-75 nominal diameter 10, 15, length from 4 to 7m, used for water supply systems, gas-mains, and heating systems; for metallurgical industry acc. TV 14-248-05-88 external diameter 17.0 mm length from 4 to 7m, used for burning-through of tap-holes in metallurgical furnaces;
• TASS "10-60" for manufacturing water and gas supply tubes acc. to GOST 3262-75 nominal diameter 15 25, length from 4 to 7m, used for water-plumbings, gas mains and heating systems.

Tube and electric welding shop #4:

• TASA "20-76" for manufacturing of water and gas supply tubes acc. to GOST 3262-75 nominal diameter 20, 50 length from 4 to 9 m, used for water-plumbings, gas-mains, and heating systems; longitudinal welded steel tubes acc. to GOST 10704-91 / 10705-80, diameter 76 mm, length from 4 to 9 m, used for pipe-lines and constructions of different functions; steel tubes of square cross section acc. to GOST 8639-82 / 13663-86 sizes 30x30, 40x40, 60x60 mm (in perspective 20x20, 25x25, 45x45 mm) length from 4 to 9 m, rectangular steel tubes acc. to GOST 8645-68 / 13663-86 sizes 40x25, 40x28 mm (in perspective 50x25, 60x40, 80x60, 80x40, 25x28, 50x30 mm) length from 4 to 9 m, steel section pipes acc. to TU 14-3-1904-93 sizes 30x30; 40x25; 40x28; 40x40; 60x60 mm and other sizes of tubes of square cross section, rectangular tubes and steel section pipes according to order of the consumer;
• The mill of single-filament drawing of tubes with force of 10 TS, is calculated for the manufacture of electric-welded cold-finished steel tubes for cardan shafts acc. to GOST 5005-82 and electric-welded cold-finished tubes acc. to GOST 10707-80 diameter Dnar 24-38 mm;
• Mouth of pipes forging machine like "Stern Braun" model of 102-3P for preparation of tubes to the drawing used the way of forging mouths;
• The mill of tri-filament drawing of tubes with force of 30 TS is calculated for the fabrication of electric-welded cola-finished tubes for cardan acc. to GOST 5005-82 and tubes GOST 10707-80 diameter Dnar 33.0- 78.0 mm;
• Aslope-drawing straightening machine RVV 250T is calculated for straightening of tubes with diameter from 19 mm to 78 mm;
• Hydro test press with control desk for testing tubes by hydrostatical pressure up to the 20 MPa.
• The plant manufactures the size-ranged tubes acc. to GOST 3262-75 and GOST 10704-91 / 9.307-89 with two-way zinc coat with the length from 6м and with thickness of zinc coat no less than 60 mcm.