Recognized leader in small and medium-sized steel electrical-welded tubes manufacture

Enterprise

Electric welding tube mill #1 "20-108" is intended for manufacture:

  • Water-gas tubes according to GOST 3262-75, nominal diameter 20—80, length up to 11 m, used for water and gas manifolds as well as for heating systems;
  • Longitudinal welded tubes according to GOST 10704-91, GOST 10705-80 with outside diameter 51.0÷108.0 mm, length up to 11.7 m, used for manifolds and structures of different purpose;
  • Sqare steel electric-welded tubes according GOST 8639-82, GOST 13663-86, dimensions from 20х20 mm up to 80х80 mm, and rectangular tubes according to GOST 8645-68, GOST 13663-86, with dimensions from 28х25 mm up to 100х60 mm, length up to 7 m used for general purpose;
  • Hollow welded profiles made of fine-grain structural steels according to DIN EN 10219-1,2 of square cross-section with dimensions from 20х20 mm up to 80х80 mm, and rectangular cross-section with dimensions from 28х25 mm up to 100х60 mm, length up to 7 m, used for metal structures;
  • Steel welded tubes for manufacture profile pipes according to specification Y27.2-00190802-026:2007 intended for further manufacture from them profile pipes by means of calibration on the shaping mill;
  • Steel welded tubes for metal structures according to specification Y27.2-00190802-024-2003 used for manufacture of racks, shelves, carcasses in trade and other organizations;

Tube electric welded mill #2 "20-76" for manufacture:

  • Water-gas tubes according to GOST 3262-75, nominal diameter 20—50, length up to 11 m, used for water and gas manifolds as well as for heating systems;
  • Longitudinal welded tubes according to GOST 10704-91, GOST 10705-80 with outside diameter 51.0÷76.0 mm, length up to 11.7 m, used for manifolds and structures of different purpose;
  • Sqare steel electric-welded tubes according GOST 8639-82, GOST 13663-86, dimensions from 20х20 mm up to 50х50 mm, and rectangular tubes according to GOST 8645-68, GOST 13663-86, with dimensions from 28х25 mm up to 60х40 mm, length up to 7 m used for general purpose;
  • Hollow welded profiles made of fine-grain structural steels according to DIN EN 10219-1,2 of square cross-section with dimensions from 20х20 mm up to 50х50 mm, and rectangular cross-section with dimensions from 28х25 mm up to 60х40 mm, length up to 7 m, used for metal structures;
  • Steel welded tubes for manufacture profile pipes according to specification Y27.2-00190802-026:2007 intended for further manufacture from them profile pipes by means of calibration on the shaping mill;
  • Steel welded tubes for metal structures according to specification Y27.2-00190802-024-2003 used for manufacture of racks, shelves, carcasses in trade and other organizations;

Tube electric welded mill #3 "20-76" for manufacture:

  • Square steel electic-welded tubes according GOST 8639-82, GOST 13663-86, dimensions from 20х20 mm up to 60х60 mm, length up to 7 m;
  • Rectangular steel tubes according to GOST 8645-68, GOST 13663-86, dimensions from 28х25 mm up to 60х40 mm, length up to 6 m;
  • Hollow welded profiles made of fine-grain structural steels according to DIN EN 10219-1,2 of square cross-section with dimensions from 20х20 mm up to 60х60 mm, and rectangular cross-section with dimensions from 28х25 mm up to 60х40 mm, length up to 7 m, used for metal structures;
  • Steel welded tubes for metal structures according to specification Y27.2-00190802-024-2003 used for manufacture of racks, shelves, carcasses in trade and other organizations;

Tube electric welded mill #4 "10-60" for manufacture:

  • Water-gas tubes according to GOST 3262-75, nominal diameter 15—32, length up to 6 m, used for water and gas manifolds as well as for heating systems;
  • Sqare steel electric-welded tubes according GOST 8639-82, GOST 13663-86, dimensions from 20х20, 25х25 mm, and rectangular tubes according to GOST 8645-68, GOST 13663-86, with dimensions from 28х25 mm up to 30х20 mm, length up to 6 m used for general purpose;
  • Hollow welded profiles made of fine-grain structural steels according to DIN EN 10219-1,2 of square cross-section with dimensions from 20х20 mm up to 25х25 mm, and rectangular cross-section with dimensions from 28х25 mm up to 30х20 mm, length up to 7 m, used for metal structures;
  • Steel welded tubes for manufacture profile pipes according to specification Y27.2-00190802-026:2007 intended for further manufacture from them profile pipes by means of calibration on the shaping mill;
  • Steel welded tubes for metal structures according to specification Y27.2-00190802-024-2003 used for manufacture of racks, shelves, carcasses in trade and other organizations;

Tube electric welded mill #5 "8-15" for manufacture:

  • Water-gas tubes according to GOST 3262-75, nominal diameter 10—20, length up to 6 m, used for water and gas manifolds as well as for heating systems;
  • Steel welded tubes for metal structures according to specification Y27.2-00190802-024-2003 used for manufacture of racks, shelves, carcasses in trade and other organizations;

Tube electric welded mill #6 "27-89" for manufacture:

  • Water-gas tubes according to GOST 3262-75, nominal diameter 20—65, length up to 7 m, used for water and gas manifolds as well as for heating systems;
  • Longitudinal welded tubes according to GOST 10704-91, GOST 10705-80 with outside diameter 51.0÷89.0 mm, used for manifolds and structures of different purpose;
  • Steel welded tubes for manufacture profile pipes according to specification Y27.2-00190802-026:2007 intended for further manufacture from them profile pipes by means of calibration on the shaping mill;
  • Steel welded tubes for metal structures according to specification Y27.2-00190802-024-2003 used for manufacture of racks, shelves, carcasses in trade and other organizations;

Tube electric welded mill #7 "12-38" for manufacture:

  • Water-gas tubes according to GOST 3262-75, nominal diameter 15—25, length up to 6 m, used for water and gas manifolds as well as for heating systems;
  • Longitudinal welded tubes according to GOST 10704-91, GOST 10705-80 with outside diameter 12.0÷38.0 mm, length up to 6 m, used for manifolds and structures of different purpose;
  • Steel welded tubes for metal structures according to specification Y27.2-00190802-024-2003 used for manufacture of racks, shelves, carcasses in trade and other organizations;

Printer friendly page